- 産業: Education; Oil & gas
- Number of terms: 4495
- Number of blossaries: 0
- Company Profile:
The Petroleum Extension Service (PETEX) is a unit of the Division of Continuing Education at The University of Texas at Austin and has been training companies and individuals since 1944.
any material (such as paper, cork, asbestos, stainless steel or other types of metal, or rubber) used to seal two essentially stationary surfaces.
Industry:Oil & gas
the efforts made to minimize the decline in a well’s production. It includes, for example, acid-washing of casing perforations to dissolve mineral deposits, scraping or chemical injection to prevent paraffin buildup, and various measures taken to control corrosion and erosion damage.
Industry:Oil & gas
a cement wiper plug that precedes cement slurry down the casing. The plug wipes drilling mud off the walls of the casing and prevents it from contaminating the cement. See cementing, wiper plug.
Industry:Oil & gas
the process of raising or lifting fluid from a well by injecting gas down the well through tubing or through the tubing-casing annulus. Injected gas aerates the fluid to make it exert less pressure than the formation does; the resulting higher formation pressure forces the fluid out of the wellbore. Gas may be injected continuously or intermittently, depending on the producing characteristics of the well and the arrangement of the gas-lift equipment.
Industry:Oil & gas
any packer designed to make a seal between the tubing and the casing during production.
Industry:Oil & gas
threads on the female section, or box, of a tool joint. See tool joint.
Industry:Oil & gas
a device installed in the tubing string of a gas-lift well onto which or into which a gas-lift valve is fitted. There are two common types of mandrel. In the conventional gas-lift mandrel, the gas-lift valve is installed as the tubing is placed in the well. Thus, to replace or repair the valve, the tubing string must be pulled. In the sidepocket mandrel, however, the valve is installed and removed by wireline while the mandrel is still in the well, eliminating the need to pull the tubing to repair or replace the valve.
Industry:Oil & gas
a portable servicing or workover unit, usually mounted on wheels and self-propelled. A wellservicing unit consists of a hoist and engine mounted on a wheeled chassis with a self-erecting mast. A workover rig is basically the same, with the addition of a substructure with rotary, pump, pits, and auxiliaries to permit handling and working a drill string.
Industry:Oil & gas
The braking device on the drawworks or airhoist to stop a load being lifted. It is a device for arresting the motion of a mechanism, usually by means of friction, as in the drawworks and airhoist brakes.
Industry:Oil & gas
a device installed on a gas-lift mandrel, which in turn is put on the tubing string of a gas-lift well. Tubing and casing pressures cause the valve to open and close, thus allowing gas to be injected into the fluid in the tubing to cause the fluid to rise to the surface. See gas-lift mandrel.
Industry:Oil & gas
