- 産業: Energy
- Number of terms: 18450
- Number of blossaries: 0
- Company Profile:
The number of revolutions that the motor turns in a given time period (i.e. revolutions per minute, rpm).
Industry:Energy
An air-source heatpump is the most common type of heat pump. The heat pump absorbs heat from the outside air and transfers the heat to the space to be heated inthe heating mode. In the cooling mode the heat pump absorbs heat from the space to be cooled and rejects the heat to the outside air. In the heating mode when the outside air approaches 32o F or less, air-source heat pumps loose efficiency and generally require a back-up (resistance) heating system.
Industry:Energy
The cost of labor, materials, and expenses incurred in maintenance of power production structures. Structures include all buildings and facilities to house, support, or safeguard property or persons.
Industry:Energy
A plant in which the prime mover is an internal combustion engine. An internal combustion engine has one or more cylinders in which the process of combustion takes place, converting energy released from the rapid burning of a fuel-air mixture into mechanical energy. Diesel or gas-fired engines are the principal types used in electric plants. The plant is usually operated during periods of high demand for electricity.
Industry:Energy
The difference between actual on-road MPG and EPA laboratory test MPG. MPG short fall is expressed as gallons per mile ratio (GPMR).
Industry:Energy
A heat pump in which the refrigerant exchanges heat (in a heat exchanger) with a fluid circulating through an earth connection medium (ground or ground water). The fluid is contained in a variety of loop (pipe) configurations depending on the temperature of the ground and the ground area available. Loops may be installed horizontally or vertically in the ground or submersed in a body of water.
Industry:Energy
The cost of labor and expenses incurred in the general supervision and direction of the maintenance of power generation stations. The supervision and engineering included consists of the pay and expenses of superintendents, engineers, clerks, other employees, and consultants engaged in supervising and directing the maintenance of each utility function. Direct supervision and engineering of specific activities, such as fuel handling, boiler room operations, generator operations, etc., are charged to the appropriate accounts.
Industry:Energy
Gas sold to customers with a provision that permits curtailment or cessation of service at the discretion of the distributing company under certain circumstances, as specified in the service contract.
Industry:Energy
Seven (7)-digit code assigned to a mining operation by the Mine Safety and Health Administration.
Industry:Energy
The efficiency of a heat pump, that is, the electrical energy to operate it, is directly related to temperatures between which it operates. Geothermal heat pumps are more efficient than conventional heat pumps or air conditioners that usethe outdoor air since the ground or ground water a few feet below the earth's surface remains relatively constant throughout the year. It is more efficient in the winter to draw heat from the relatively warm ground than from the atmosphere where the air temperature is much colder, and in summer transfer waste heat to the relatively cool ground than to hotter air. Geothermal heat pumps are generally more expensive($2,000-$5,000) to install than outside air heat pumps. However, depending on the location geothermal heat pumps can reduce energy consumption (operating cost) and correspondingly, emissions by more than 20 percent compared to high-efficiency outside air heat pumps. Geothermal heat pumps also use the waste heat from air-conditioning to provide free hot water heating in the summer.
Industry:Energy
