- 産業: Textiles
- Number of terms: 9358
- Number of blossaries: 0
- Company Profile:
Celanese Corporation is a Fortune 500 global technology and specialty materials company with its headquarters in Dallas, Texas, United States.
1. The form of polymer feedstock used in fiber production. 2. The feedstock for a pulp digestor. 3. A defect in a nonwoven fabric.
Industry:Textiles
1. In natural fibers, the dry weight of fibers or yarns plus the commercial moisture regain. 2. In manufactured fibers, the dry weight of staple spun yarns or filament yarns after scouring by prescribed methods, plush the commercial moisture regain.
Industry:Textiles
1. The degree of evenness of thread spacing. 2. The degree to which underlying structure is concealed by the surface material, as in carpets, the degree to which pile covers backing. 3. The ability of a dye to conceal defects in fabric.
Industry:Textiles
1. In general, the optical property of being clear. 2. In acetate manufacture, a measure of the appearance of dope solutions, indicating the quality of the acetylation mixture. 3. In printing, the sharpness or definition of a print pattern.
Industry:Textiles
1. In finishing fabrics, the process by which resins or plastics are set in or on textile materials, usually by heating. 2. In rubber processing, vulcanization. It is accomplished either by heat treatment or by treatment in cold sulfuryl chloride solution.
Industry:Textiles
1. In carding, a large cast iron shell, with an outer diameter of 40 to 45 inches, completely covered with card clothing on the surface. The shell is mounted rigidly on a shaft which projects at each end to rest in bearings. The cylinder must be accurately balanced since it rotates at speeds of 160 revolutions per minute and higher. 2. The main roll, or pressure bowl, on roller printing machines. The engraved rolls that apply color are arranged around the cylinder. (Also see PRINTING, Roller Printing.) 3. A slotted cylindrical housing for the needles in a circular-knitting machine. The number of slots per inch in the cylinder determines the cut of the machine.
Industry:Textiles
1. An inferior cotton fiber that was accidentally cut because it was too damp during ginning. 2. A term sometimes used to denote staple of manufactured fibers.
Industry:Textiles
1. An irregular spiral or twisted condition characteristic of mature cotton fiber. It is visible under a microscopic. The finer fibers are generally more twisted than the coarser fibers. 2. Coil and curl in certain types of textured yarns which provide bulkiness to the yarn.
Industry:Textiles
1. An article or substance of two or more constituents, generally, with reinforcing elements dispersed in a matrix or continuous phase. 2. Hard or soft constructions in which the fibers themselves are consolidated to form structures rather than being formed into yarns. Rigidity of these constructions is controlled by the density, the modulus of the load-bearing fibers, and the fraction of fusible fibers. Strength is controlled by adhesion and shear-yield strength of the matrix unless fibers are bonded in a load-transferring matrix. 3. A structure made by laminating a nonwoven fabric with another nonwoven, with other materials, or by impregnating a nonwoven fabric with resins.
Industry:Textiles
1. A yarn with a fuzzy pile protruding from all sides, cut from a woven chenille weft fabric. Chenille yarns are made from all fibers, and they are used as filling in fabrics and for embroidery, fringes, and tassels. 2. Fabric woven with chenille yarn.
Industry:Textiles
